Description
RHINOLITE® RHINOFILL™ READY MIXED CRACK FILLER
RhinoLite® RhinoFill™ Ready Mixed Crack Filler, is suitable for interior and exterior applications, available in a paste form, has low shrinkage, excellent adhesion and can be applied in layers of up to 5 mm. It can be sanded to a smooth finish.
Key facts
- Suitable for sand/cement, plaster, plaster boards, concrete, stone and other masonry surfaces.
- Can be used straight from the tub.
- It is slump resistant and can be applied in thick layers up to 5 mm.
- Excellent strength, good adhesion and abrasion resistance.
Application
- Use a clean scraper/putty knife.
- Make sure that product is properly mixed.
- Fill the cracks, holes and indentations using a scraper or putty knife.
- Apply in layers from 1mm to 5 mm thick. For deeper cracks, holes or indentations should be done in two or more steps.
- Even out the RhinoLite® RhinoFill™ Ready Mixed Crack Filler while wet to level with the surrounding surface. Best applied when mix is wet.
- Allow to fully dry before sanding, drilling or painting. Drying times are dependent on thickness of application and atmospheric conditions. Apply a universal undercoat before painting.
- Should sanding still be required – use wet 100 grit waterproof sandpaper to obtain the best results.
Explore more from our collection.
Reviews
There are no reviews yet.